Installing The Batteries; Installing The Mouse Suite Software - Lenovo ScrollPoint Pro Mouse User Manual

This package contains:
v One ThinkPad Bluetooth Laser Mouse
v Warranty book
v Laser Safety Manual
v One CD containing installation software and a User's Guide
v Two AA batteries

Installing the batteries

Your ThinkPad Bluetooth Laser Mouse needs two AA batteries to work with your computer. For better
performance, install alkaline batteries in your mouse.
To install the batteries, complete the following procedure:
1. Press the battery compartment release button, as shown in the figure below.
2. Insert the two batteries according to the polarity indicators in the mouse.
3. Push down the battery compartment cover and slide it forward until it clicks into place.
Notes:
1. The green light-emitting diode (LED) indicates that the batteries are charged and ready for use.
2. The amber LED flashing indicates a low battery power level. You need to install new batteries.
3. Turning off the power switch when you are not using the mouse will extend the battery life.

Installing the Mouse Suite Software

Included in your package is a CD containing installation software for the mouse. To install the Mouse
Suite Software:
1. Turn on your computer and start the operating system.
2. Insert the Device Driver CD into your CD or DVD drive. Click the Driver arrow. Follow the on-screen
instructions. If the setup program does not open, go to Step 3. If the setup program opens, go to Step
6.
3. Click Start.
4. Click Run.
5. In the command line box, type X:\setup where X is the drive letter for your CD-ROM drive.
6. Click OK.
7. Follow the on-screen instructions to complete the Mouse Suite Software installation.
Note: When you are prompted, click Bluetooth since the mouse uses a Bluetooth connection.
6-2
Combined Mouse User's Guide