Using The Mouse And The Lenovo Mouse Suite; Solving Usb Problems - Lenovo ScrollPoint Pro Mouse User Manual

5. In the Windows will search for new drivers window, press the Enter key. Your computer will display
the location of the driver.
6. Press Enter. The Windows has finished installing the software that your new hardware device
requires window opens.
7. Press Enter to complete the installation.
To install the mouse in USB mode in a computer using Windows XP do the following:
1. Connect the mouse USB connector to the computer USB connector.
2. The New Hardware Found window will open stating, Windows is installing the software for your
new hardware. Windows XP will automatically install the proper device drivers to operate your new
mouse.
Note: Do not connect the mouse to a USB connector on a ThinkPad or other mobile computer until you
see the Windows XP desktop.

Using the mouse and the Lenovo Mouse Suite

The Lenovo USB Optical Wheel Mouse has multiple functions and features such as Zoom and
Auto-scrolling, which help you to increase your productivity. You can also assign frequently used
functions or shortcuts to the mouse buttons by using the tabs in the Mouse Suite Software.
To start the Mouse Suite Software, complete the following procedure:
1. Double click the mouse icon in the Windows system tray or right-click the icon to view the context
menu, and then click Adjust Mouse Properties.
If the mouse icon is not in the Windows system tray, click Start > Control Panel > Mouse or Start >
Settings > Control Panel > Mouse to start using the software.
2. The main window opens with several tabs. Click each tab to view related settings. Under each tab
there are three buttons:
v OK - To save your settings and close the dialog.
v Cancel - To exit the window without saving.
v Apply - To have your changes take effect without closing the window.
For more information on customizing the settings, click Help in the lower right corner of the Lenovo
Mouse Suite Software window.

Solving USB problems

This section contains information on solving problems with USB connectivity.
Note: There have been some cases where a computer has USB connectors, but the BIOS does not support
them. Contact your computer manufacturer to find out how to upgrade the BIOS.
The Lenovo USB Optical Wheel Mouse does not respond.
v Make sure that your computer is turned on when you perform the installation. Try disconnecting, and
re-connecting the mouse.
v Be sure you are not running Windows NT. This operating system does not support USB connectivity
for this device.
v If you are using Windows 2000, make sure that all the USB switches in the BIOS are enabled.
To check whether all the USB connectors are enabled, do the following:
– Access your computer Setup program during startup. Press F1, F2, or the Delete Key during startup.
If you are unsure how to access the Setup program for your computer, see the documentation that
came with your computer, or contact the manufacturer.
5-2
Combined Mouse User's Guide