Pairing The Lenovo Usb Receiver With A Mouse; Troubleshooting - Lenovo Combined User Manual

Pairing the Lenovo USB Receiver with a mouse

By default, the ThinkPad Precision Wireless Mouse is paired with the Lenovo USB Receiver that shipped
with the mouse. The ThinkPad Precision Wireless Mouse is ready for use after you connect it to your
computer. In addition to the ThinkPad Precision Wireless Mouse, you also can pair the Lenovo USB Receiver
with any Lenovo wireless mouse printed with the
Lenovo wireless mouse, do the following:
1. Connect the Lenovo USB Receiver to an available USB connector on your computer.
2. Place the mouse within 10 cm (3.94 inches) of the Lenovo USB Receiver.
3. Move the power switch on the mouse to the on position.
4. Press and release the pairing button on the mouse. After the status indicator on the mouse blinks for
five times and then turns off, the Lenovo USB Receiver has been successfully paired with the mouse.

Troubleshooting

This topic provides basic troubleshooting information when you encounter problems with your mouse.
Problem: The mouse is not recognized by the operating system.
Solution: To solve the problem, perform one of the following procedures:
Procedure A:
Do the following:
• Install the mouse again.
• Access your computer Basic Input/Output System (BIOS) Setup Utility program during the startup process
and make sure that all the USB connectors on your computer are enabled.
Notes:
– For information about how to access or use the BIOS Setup Utility program on your computer, see the
documentation that came with your computer.
– If all USB connectors on your computer do not work, probably the computer BIOS does not support
them. To solve this problem, go to http://www.lenovo.com/support to download the latest BIOS
updates, or go to http://www.lenovo.com/support/phone to find the Lenovo technical support for
your country or region.
Procedure B:
For the Windows XP, Windows Vista, or Windows 7 operating system:
1. Click Start ➙ Control Panel.
2. Depending on your Control Panel mode, double-click System or click Performance and Maintenance
➙ System.
3. Click the Hardware tab.
4. Click Device Manager.
5. Scroll down until you find Mice and other pointing devices. Then, expand the Mice and other
pointing devices category.
6. Right-click HID-compliant mouse, and then select Uninstall. A warning will be displayed, prompting
you that you are going to remove a device from the operating system.
icon. To pair the Lenovo USB Receiver with a new
.
Chapter 4 ThinkPad Precision Wireless Mouse
25