System Setup Mode; To Enter The System Setup Mode; To Exit The System Setup Mode - Spektrum DX7 User Manual

System Setup Mode

Includes programming functions that are normally used during setup. System Setup
programming functions include:
Model Select (Page 67)
Model Name (Page 68)
Type Select (Page 69)
Model Reset (Page 70)

To Enter the System Setup Mode

• With the power switch off, press and hold the DowN and SELECT keys simultaneously.
• Turn on the power switch.
• The system will display the last system setup screen that was used.

To Exit the System Setup Mode

• Press the DowN and SELECT keys simultaneously.
• The main menu will be displayed
• Or turn the transmitter off to exit the System Setup Mode.

[MODEL SELECT]
◊SELECT
MODEL 1 T-REX
HELI
[MODEL NAME]
MODEL 1
DSM <T-REX450>
[TYPE SELECT]
MODEL 1
◊HELI
ACRO
[MODEL RESET]
MODEL 1 HELI
◊DATA RESET
INTEG-T
0:00:34
UP and DOWN key
MODEL 1
SPEKTRUM DX7 2.4GHz
Hold while turning on transmitter
[SWASH TYPE]
1 SERVO
DSM
NORM
[INPUT SELECT]
HELI
≥AUX2
GYRO
[THRO RECOVERY]
[TRAINER]
DSM
≥NORMAL
SW:L-ROCKER
INCREASE and DECREASE key
10.6V
SPEKTRUM DX7 • HELICOPTER PROgRAMMINg gUIDE
Swash Type (Page 75)
GEAR
Input Select (Page 73)
INH
Throttle Recovery
INH
(Page 72)
Trainer (Page 71)
CLEAR key