Battery Charging
Transmitter/Receiver
It is imperative that you fully charge both the transmitter and the receiver battery packs prior to each
flying session. To do so, using the included wall charger, leave the charger and batteries connected overnight
(16 hours).
The charger supplied with this system is designed to recharge your batteries at a rate of 110mA for the
transmitter and 110mA for the receiver battery pack.
Transmitter Polarity
The center pin on all Spektrum
negative. Therefore, the center pin on all Spektrum
chargers is negative, not positive. This is different
from many other manufacturers' chargers and radio
systems. Beware of improper connections based on
"color coded" wire leads, as they may not apply in
this instance. You must make sure that the center
pin of your Spektrum transmitter is always
connected to the negative voltage of your charger
for correct polarity hookup.
CHARGER PIGTAIL FOR TRANSMITTER
CHARGER PIGTAIL FOR RECEIVER
CENTER
PIN IS
Charger
RED–POSITIVE / BROWN–NEGATIVE / ORANGE–SIGNAL
The pilot lamps should always be ON during the charging operation. If they're not, check to make sure that both
the transmitter and receiver are switched OFF. Do not use this charger for equipment other than Spektrum. The
charging plug polarity may not be the same and equipment damage can result. During the charging operation,
the charger's temperature is slightly elevated. This is normal.
10
transmitters is
®
BLACK TO POSITIVE
RED TO NEGATIVE
RIGHT SIDE OF TRANSMITTER
OUTSIDE IS POSITIVE
SPEKTRUM DX7 • INTRODUCTION
CENTER
PIN IS
NEGATIVE
RED–P
Need help?
Do you have a question about the DX7 and is the answer not in the manual?
Questions and answers
how do you clar memory on spektrum dx7
The Spektrum DX7 does not have a total system reset option. However, you can clear memory by zeroing out each model memory location separately or by overwriting it with new data.
This answer is automatically generated
wich does the DX7 use
The Spektrum DX7 uses DSM2™ (Digital Spread Spectrum Modulation) technology with DuaLink™, which operates on the 2.4GHz band. This technology provides full-range capability and is resistant to internal and external radio interference.
This answer is automatically generated