Download Print this page

Sanyo DVC-2600 Instruction Manual page 23

+video cassette recorder
Hide thumbs Also See for DVC-2600:

Advertisement

Erasing a Track from Program List 1 Press PROGRAM during playback or in the stop mode to enter the Program Edit mode. The E 3 4 CD 4 Press 3/4 to
select a track, then press SELECT/ENTER to place the selected track on the Program list. Repeat step 3 to place additional tracks on the Program list.
Program TRACK 12 TRACK 8 TRACK 10 TRACK 3 mark will appear. E MP3 TRACK 1.MP3 TRACK 2.MP3 TRACK 3.MP3 TRACK 4.MP3 TRACK 5.MP3
MP3 E 2 Press 2 to move to the Program list. 4 3 Use 3/4 to select the track that you wish to erase from the Program list. 4 Press CLEAR. The track will be
erased from the Program list. TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 8 0:56:35 STER.
Clear All NORM. TRACK 8.MP3 00:00 1 Clear All OFF 5 When finished, Press the PROGRAM to exit the Program Edit mode. The E mark will disappear.
Audio CD menu MP3 menu Erasing the Complete Program List 1 Follow steps 1-2 of "Erasing a Track from Program List" as above. 4 2 Use 3/4 to select
"Clear All", then press SELECT/ENTER. The complete Program for the disc will be erased. The programs are also cleared when the disc is removed. 5 When
6 Press 2. 7 The programmed track you selected last is highlighted on the program list. To resume normal playback from programmed playback Press and
hold PROGRAM for 3 seconds until "PROG." indicator disappears on the menu screen. 4 Press 3/4 to select the track you want to start playing. Press TITLE
to move to the next page. Press DISC MENU to move to the previous page. 8 Press PLAY to start. Playback begins in the order in which you programmed the
Playback stops after playing the last programmed track on the program list. 31 OPERATION To repeat all tracks on the program list, press REPEAT a
second time. Additional Information - DVD Part Video Mode Setting DVD Notes on MP3 Discs About MP3 An MP3 file is audio data compressed by using
MPEG1, the audio layer-3 file-coding scheme. We call files that have the .mp3 file extension MP3 files.
The DVD+VCR cannot read an MP3 file that has a file extension other than .mp3. The DVD+VCR cannot read a fake MP3 file that has a file extension .mp3.
With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the
video mode. To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on
the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved. Video mode change
sequence: MODE1 MODE2 MODE3 MODE4 MODE5 MODE1 MP3 disc compatibility with this DVD+VCR is limited as follows: 1. 2. 3. 4.
Sampling Frequency/only at 44.1kHz Bit rate/within 32 - 320kbps CD-R physical format should be ISO 9660 If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example DirectCD etc., it is impossible to playback MP3 files. We therefore recommend that you use Easy-CD Creator,
which creates an ISO9660 file system. A single session disc requires MP3 files in the first track. If there is no MP3 file in the 1st track, it cannot playback
MP3 files. If you wish to playback MP3 files, format all the data in the disc or use a new one. This player can play the CD-DA Multi-session disc. But, we
cannot guarantee for all other Multi-session discs. File names should be named using 8 letters or less and must incorporate the .
," etc. Total number of files on the disc should be 200 or less. If a disc contains more than 200 files, the files with the numbers 201 or more can not be
MP3 TRACK 7.MP3 Program TRACK 8.MP3 TRACK 2.MP3 TRACK 4.MP3 TRACK 3.
finished, Press the PROGRAM to exit the Program Edit mode. The E mark will disappear.
tracks and "PROG." appears on the menu screen.
mp3 extension e.g. "********.MP3". Do not use special characters such as "_?!][+*}{`[@ ]:;\/.
You're reading an excerpt. Click here to read official SANYO
DVC-2600 user guide
http://somemanuals.com/dref/81636
mark.
TRACK 6.
displayed and played back.

Advertisement

loading