Advertisement
FUNCTION DISPLAY Indicates the function in progress. HI-FI DISPLAY Indicates when this unit is playing back tape recorded with Hi-Fi. CHANNEL
DISPLAY Indicates the selected channel (or LINE1, LINE2). STEREO/SAP DISPLAY (MONO is not displayed) Shows the type of audio signal received by the
VCR tuner. DATE DISPLAY Shows the current date. (Month/Date/Day of the week format) "Home video" JUL 5 , SAT 2:15 PM CLOCK/COUNT/REMAIN
DISPLAY Shows the current time, the tape counter and remaining time on the tape. Easy Information Screen (Station ID) Easy Information Screen (Program
details) Setting the On-Screen Display The SETUP, clock setting, and timer recordings are accessed conveniently with On-Screen Menu Displays that lead
The following pages describe the On-screen selections to be set. Each press of the SELECT/ENTER changes the TV screen in the following sequence. STOP
SP CH 4 STEREO Menu Selection JUL 5 , SAT 2:15 PM 2:15 PM 0:35:40 REM 1:58 Your VCR allows remote control adjustment of several features. Press
MENU and the MAIN menu will appear. 1 Select the 2 then pressdesired menu with v/V button and SELECT/ENTER.
Note MAIN MENU Notes The function displays can be seen displayed on the TV screen for 5 seconds. The clock (or tape counter, tape remaining) mode will
continue until you press SELECT/ENTER. The tape counter and the remaining tape length indicator appear only when a cassette is inserted. Also, the
remaining tape length indicator appears after any tape operation. Menus remain on-screen for 3 minutes.
CLOCK SET (page 16) PROGRAM (page 22) TUNING (page 15) SETUP (page 15) 3 Press MENU when finished. 14 Before Operation - VCR Part
(Continued) Setting the VCR Setup Menu Channel Selection PREPARATION This DVD+VCR is equipped with a frequency synthesized tuner capable of
receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Preparation: Connect the DVD+VCR to the
desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 11. 1 Press MENU and the MAIN menu will
appear. v/V to select the V 2 Press SELECT/ENTER. SETUP menu, then press The SETUP menu will appear. AUTO CHANNEL PROGRAMMING V /V to a
desired option on 3 Press vmenu.choosepress b/B to choose athe B SETUP Then desired setting. FUNCTION OSD The on-screen display of this DVD+VCR
FUNCTION OSD can be switched between ON and OFF by pressing b/B. 1 Press MENU and the MAIN menu will appear. v/V to select the TUNING V 2
Press SELECT/ENTER.appear. menu, then press The TUNING menu will LANGUAGE SELECT The on-screen programming of this DVD+VCR can be
displayed in either English, Spanish, or French. LANGUAGE SELECT can be switched among ENGLISH, SPANISH and FRENCH by pressing b/B. AUDIO
MODE The DVD+VCR has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is
generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The
normal track is always played so the cassette can be played on a DVD+VCR that does not have VHS Hi-Fi.
AUDIO MODE can be switched between HI-FI and NORMAL by pressing b/B. V to the SOURCE 3 Presspress chooseselect TUNER.SELECT option, b/B to B
then Press b/B repeatedly to switch among TUNER, LINE1 and LINE2. V /V to choose the 4 Press vthen press b/B toAUTO CHANNEL SET B set the channel.
option, The tuner will automatically cycle through all available channels in the area and place them in the tuner's memory.
SET PROCEEDING 5 After the AUTO CHANNELTUNING BAND is setis complete, make sure the V appropriately (TV or CATV) by pressing v/V and
choosing the correct TUNING BAND (TV or B CATV) by pressing b/B using the TUNING menu. Remember, TV is for the air antenna reception, CATV is for
you through each step.
can be turned on or off.
cable or wireless cable connection.
You're reading an excerpt. Click here to read official SANYO
DVC-2600 user guide
http://somemanuals.com/dref/81636
Advertisement
