Multiplexer Setting; Output A Display Settings - Mitsubishi Electric DX-TL5000E Installer Manual

System (continued)

Multiplexer Setting

This menu is used to set the multiplexer setting of <Output
A Display Settings> and <Output B Display Settings>
(Setup Menu System Multiplexer Setting Output A
Settings/Output B Settings) respectively.

Output A Display Settings

This item is used to set the camera number to be displayed
in the split screen display on the monitor connected to
OUTPUT A. And also used to set the sequential display
settings and the switching time. Sequential display is the
function to switch the selected displays automatically.
The selectable screen types are shown in the table on
page 61.
Setup Menu
System
4
Multiplexer Setting
5
1 Output A Settings
1 Split 4 screen
1
2
3
4
Split 9 screen
2
1
2
3 Split 10 screen
1
2
4 Split 13 screen
1
2
5 Split 16 screen
6 Sequence Single
7 Sequence Multi
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
62
Split 4a screen
Split 4b screen
Split 4c screen
Split 4d screen
Split 9a screen
Split 9b screen
Split 10a screen
Split 10b screen
Split 13a screen
Split 13b screen
(Split screen)
1. Select the camera number to be displayed for each
step
split screen.
• The same camera number cannot be set repeatedly
in one split screen display.
(Sequential screen)
2. For single sequential screen, set the displaying order
step
of the camera number in "Sequence Single."
3. For split sequential screen, select the displaying
step
order of the screen type in "Sequence Multi."
4. Select the desired switching time.
step
4
step
1
step
2
step
3
step
Setup Menu