Clamping The Cables; Connecting To An Analogue Video Cassette Recorder - Mitsubishi Electric DX-TL5000E Installer Manual
Hide thumbs
Also See for DX-TL5000E:
- Installer manual (139 pages) ,
- Operation manual (49 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
Connections (continued)
Clamping the cables
1. Put the supplied cable clamping band into the
step
clamper hole on the rear panel.
• There are 2 clamper holes on the unit, for power
cable and USB cable.
2. Put the cable to be clamped through the cable
step
clamping band as illustrated below.
• Face the serrated surface of the band inside.
Connecting to an analogue video cassette recorder
To VIDEO OUT
connector
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
22
Commercially available video cable
3. Pull the edge of the cable clamping band until it
step
stops.
To VIDEO IN
connector
Analogue video cassette recorder
Advertisement
Table of Contents
