Command code table
Detail of the numbers:
#1
: When "Delimiter" in the <RS-232C Setting> is set to "CR," carriage return code (0DH) is input. When "Delimiter" is
set to "CR•LF," carriage return code (0DH) and line feed code (0AH) are input.
#2
: When "Delimiter" in the <RS-232C Setting> is set to "CR," carriage return code (0DH) is output. When "Delimiter"
is set to "CR•LF," carriage return code (0DH) and line feed code (0AH) are output.
: Indicates one number or character.
*
RS-232C [Direct operation specification] operation setting command form (1/7)
Command name
Command
Power
Record
Playback
Acquire information
of recording start/
end point
Status
5
Note