Receiving Automatically In Answering Machine/Fax Mode; Receiving Faxes Manually Using An Extension Telephone; Receiving In Secure Receiving Mode - Samsung CLX-9252 9352 Series User Manual

Receiving automatically in Answering Machine/Fax
mode
To use this mode, you must attach an answering machine to the EXT socket
on the back of your machine. For details, refer to the optional fax kit
installation guide.
If the caller leaves a message, the answering machine records the message
as it would normally. If your machine detects a fax tone on the line, it
automatically starts to receive the fax.
• If you have set your machine to this mode and your answering
machine is switched off, or no answering machine is connected to
EXT socket, your machine automatically goes into the Fax mode
after a predefined number of rings.
• If your answering machine has a user-selectable ring counter, set
the machine to answer incoming calls within 1 ring.
• If you are in the Telephone mode when the answering machine is
connected to your machine, you must switch off the answering
machine. otherwise, the outgoing message from the answering
machine will interrupt your phone conversation.
Receiving faxes manually using an extension
telephone
This feature works best when you are using an extension telephone
connected to the EXT socket on the back of your machine.
When you receive a call on the extension phone and hear fax tones, press
the keys *9* on the extension phone. The machine receives the fax.
Press the buttons slowly in sequence. If you still hear the fax tone from the
remote machine, try pressing *9* once again.
To change the *9* to, for example, *3*, follow the steps below:
1. Press Machine Setup > Application Setting > Fax Settings >
Recieve Start Code from the display screen.
2. Press On to activate this feature.
3. Enter number 3 using the numeric keypad on the control panel
4. Press OK.

Receiving in secure receiving mode

You may need to prevent your received faxes from being accessed by
unauthorized people. You can turn on secure receiving mode to restrict
printing of received faxes when the machine is unattended. In secure
receiving mode, all incoming faxes go into memory.
1. Press Machine Setup > Application Setting > Fax Settings > Secure
Receive from the display screen.
The Secure Receive mode can only be configured by an
authorized user who has registered an ID and a password on the
machine. When the machine requests, enter the ID and password.
2. Press a fax line if your machine has multiple fax lines.
3. Press On to active this feature.
When the machine receives a fax in this mode, Print will be
activated. If you want to print the secured faxes, press Print. All
secured faxes will be printed out.
4. If you want incoming faxes to go into memory always, press Whole Day
. Otherwise, go to next step.
5. Press Start Time, and set the specific start time using the up/down or
left/right arrows. Press OK.
6. Press End Time, and set the specific end time using the up/down or
left/right arrows. Then press OK.
7. Press OK from the display screen.
To deactivate the Secure Receive feature, press Off. In this case, the
received fax will be printed out.
Faxing (optional)_ 117