Installing Internal Components; Removing The Access Panel - HP Integrity BL860c i2 User's & Service Manual

4. Close the lever to lock the drive into place.

Installing internal components

Removing the access panel

1. Lift the access panel latch.
2. Slide the access panel backwards approximately 2 cm (0.75 in).
3. Remove the access panel by lifting it straight up and off the server blade.
After the access panel is off, you can do the following:
Add an additional processor
Add additional memory DIMMs ("DIMMs").
Add additional mezzanine cards
("Processor and heatsink
("Mezzanine cards").
module").
Installing internal components 43