Accessing Internal Components; Removing The Pedestal Kit Feet - HP Integrity rx2800 i2 Installation Manual

3 Accessing internal components

To access internal components on a pedestal-mounted server:
1. Power down the server and remove all cables.
2. Remove the pedestal kit feet.
Figure 3-1 Removing the pedestal kit feet
3. Lay the server on the left side (facing the front of the server). The right side of the pedestal
kit (with the ventilation holes) should be facing up.
4. Unscrew the captive thumbscrews on the rear of the pedestal kit for the right side pedestal
kit piece.
17