Fujitsu PRIMERGY RX200 S2 User Manual page 20

2
Before installing GAM, complete the following preparation:
• Check that TCP/IP is installed and working properly.
• Check that ServerView is installed and working properly.
• Insert the ServerStart CD-ROM provided with the server into the CD-ROM drive.
• Exit all applications.
3
Click [Start]
The Global Array Manager Setup wizard starts up.
4
In the [Welcome] window, click [Next].
The [Software License Agreement] window appears.
5
Click [Yes].
The [Select Components] window appears.
Make sure the boxes next to [Global Array Manager Server] and [Global Array Manager
Client] are checked.
Uncheck [SANArray Manager Client].
20
Exit all applications before starting installation. Especially, if you install GAM
while Event Viewer or Computer Management is running, the installation
may fail.
→
[Run...]. Enter the following path and click [OK].
[CD-ROM drive name]:\PROGRAMS\GENERAL\LSI\GAM\install.bat
[SANArray Manager Client] is not supported. Do not install this.