Installation Flow - Fujitsu PRIMERGY RX200 S2 User Manual

2.1

Installation Flow

The following shows an overview of how to install the OS.
When using Linux on the server which has not bundled the Linux service, refer to the
Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
When Installing the OS on a Newly Created Disk Array
New disk array
1 Configuring a disk array using the SCSI setup utility
→"Chapter 8 Hardware Settings/Utilities" in "User's Guide"
2 Installing the OS and device drivers
→ "Chapter 4 Installing the OS Manually" in "User's Guide"
3 Installing GAM
→"Chapter 3 Installing Global Array Manager (GAM)" ( pg.17)
14
Onboard SCSI array
controller
OS