Direct Station Selection (Dss) Button - Panasonic KX-TD500 User Manual

2.2

Direct Station Selection (DSS) Button

Allows you to assign a Flexible (CO, DSS) button as a DSS button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO, DSS) button you wish
to assign as a DSS button.
<PT Display Example>
EXT—
<PT Display Example>
EXT—xxxx
• To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• DSS buttons are provided on a DSS Console without default setting. You can assign
the desired extension number or feature on each DSS button from the paired PT.
• You cannot enter non-existent extension numbers.
Station Programming
1
Dial 1. Enter the extension number
(3 or 4 digits).
CLR
(-xxxx:extension number)
CLR
(Assignment)
extension no.
Press STORE.
• The STORE indicator lights.
• The display shows the initial
programming mode.
Station Programming
AUTO DIAL
STORE
2-13