4.3
Station Features and Operation
Flash
You can disconnect the current call and make another call without hanging up.
PT
While hearing any tone, dialing, or talking;
FLASH
Press FLASH.
Conditions
PT
• Flash or External Feature Access
Pressing the FLASH button on a PT results in either sending Flash signal (External
Feature Access) or disconnecting the current call (Flash). This is determined by System
Programming (Section 4.2.7 System - System Option, "(3) FLASH button operation
while CO talking" and "(4) FLASH button operation when "Don't release the trunk" is
selected at #3." in the Installation Manual).
PT
• Pressing the FLASH button re-starts the conversation duration, outputs an SMDR
record and checks toll restriction level again.
Programming References
• System Programming — Installation Manual, Section 4
4.2.7 System - System Option
4.3.1 Group - Trunk Group
Feature References
External Feature Access
Dial tone
— (3) FLASH button operation while CO talking
— (4) FLASH button operation when "Don't release the trunk" is selected
at #3.
— Disconnecting Time
phone no.
Dial the phone number.
Station Features and Operation
F
4-101