One-Touch Dialing - Panasonic KX-TD500 User Manual

4.3 Station Features and Operation

One-Touch Dialing

Allows you to make a call (intercom or outside) or access a system feature with the
touch of a button. This is done by storing an extension number, telephone number or
feature number (up to 16 digits) in a One-Touch Dialing button.
Dialing
PT
Lift the handset or press
SP-PHONE/MONITOR.
Conditions
PT
• One-Touch Dialing button can be programmed by Station, User or System
Programming.
PT • If you store the telephone number of an outside party, a line access code (9, or 801
through 848) must be stored as the leading digit.
PT
• You may press a CO button to select a desired CO line directly before pressing the
One-Touch Dialing button.
PT
• Combination dialing
Speed Dialing, One-Touch Dialing, manual dialing, Last Number Redial and Saved
Number Redial can be used in a combination.
PT • Storing more than 17 digits number
It is possible to store a number consisting of 17 digits or more by dividing it and
storing it in two One-Touch Dialing buttons. In this case, a CO line access code
should be stored in the first button.
PT
• Full One-Touch Dialing
If "Full One-Touch Dialing" is enabled, press the One-Touch Dialing button directly
without going off-hook.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — One Touch Dialing Button
Full One-Touch Dialing Assignment
• User Programming (Section 3)
[005] Flexible CO Button Assignment
• System Programming — Installation Manual, Section 4
4.4.2 Line - Extension Line
4.4.3 Line - DSS Console
Feature References
Full One-Touch Dialing
(CO)
Press CO, if required.
— Flexible CO/PF Key Assignment
— Flexible DSS/PF Key Assignment
(One-Touch)
Press One-Touch Dialing
(Flexible button).
Station Features and Operation
O
4-139