System Feature Access Menu - Panasonic KX-TD500 User Manual

4.5

System Feature Access Menu

You can access various features using the messages which are displayed in
alphabetical order.
To access the features, press the Feature (F4) button on the initial display first, search
for the desired feature message by pressing the NEXT (S3) button. Then press the
Function button which is next to the message. Additional parameters may be required.
To access the features while receiving a call (e.g. ringing), press the INTERCOM/DN
button first. Then follow the procedures on the following pages.
Features on the First Display
Absent Message
Capability
Shows your message on
the calling party's display.
Cancel
Dial message
number (1 through 9).
On-hook.
Enter the parameters,
if required.
4-260
Station Features and Operation
Special Display Features
Set
Trunk Busy-out
Setting
(operator/manager only)
Refer to the
corresponding feature
in Section 4.4,
"Operator / Manager
Service Features".
On-hook.
Extension STA Speed
Features SYS Speed
Call Log
RING BGM
CONT
First Display
Absent MSG Off
Absent MSG On ( 1-9)
BSY Out Cancel ( PHY)
BSY Out Confirm ( PHY)
BSY Out Set ( PHY)
MENU PREV NEXT
See the next page.