Table of Contents
Advertisement
Possible Problems
Start gathering group data
Target = xxx, Total = yyy
End gathering group data
Syntax error: "line"
Hitachi Universal Storage Platform V/VM Hitachi Performance Manager User's Guide
Probable Causes and Recommended Action
The Export Tool starts collecting data specified by the group
subcommand.
The number of targets is xxx and the total number is yyy
Note
(refer to
below).
The Export Tool ends collecting data.
Note
: For example, suppose that the storage system
contains 100 parity groups and the command file contains
the following command line:
group PG 1-1:1-2
The Export Tool displays the message "Target=2,
Total=100", which means that the group subcommand
specifies two parity groups and that the total number of
parity groups in the storage system is 100.
A syntax error is detected in a command line in your
command file. Check the command line for the syntax error
and then correct the script.
Note
: Some operands must be enclosed by double
quotation marks ("). Check the command line to find
whether double quotation marks are missing.
Troubleshooting
8-7
Advertisement
Table of Contents
