Table of Contents
Advertisement
SECTION 2
Controls & Indicators
Programming auto off Timer Feature
Set the brewer to turn off two hours after the last brew.
Press the Power Button to turn on the brewer.
1.
7
fig.
2.
Press the black Auto Off Button to turn on the
Auto Off Timer feature (fig. 7). The green Auto
Off Light will illuminate.
When the Auto Off Timer is enabled, your
brewer will automatically turn off two hours
after your last brew.
To disable the Auto Off Timer, simply press the
3.
black Auto Off Button again and the green Auto
Off Light will turn off.
(LED Control Center)
SECTION 3
Cleaning & Maintenance
cleaning external Parts
Regular cleaning of the brewer's external components is recommended.
Never immerse the brewer in water or other liquids. The Housing and other
1.
external components may be cleaned with a soapy, damp, non-abrasive cloth.
The Drip Tray can accumulate up to 8 oz. of overflow. The Drip Tray and
2.
Drip Tray Plate should be periodically inspected and rinsed clean. To
remove the Drip Tray Assembly, simply slide it toward you, keeping it level
at all times to avoid spilling. The Drip Tray and Drip Tray Plate should not
be placed in the dishwasher. They should be cleaned with a damp, soapy,
non-abrasive cloth and rinsed thoroughly.
cleaning the K-cup
®
1. Cleaning the Parts —
8
fig.
Assembly can be placed onto the top shelf of a
dishwasher.
the dishwasher.
Handle and grasp the top of the K-Cup
Holder with one hand while pushing up on the
bottom of the K-Cup
underneath with the other until it releases
(fig. 8). After cleaning, align the K-Cup
Holder with the opening using the two front ribs
as a guide and snap into place from the top.
10
Pack holder assembly
The K-Cup
Pack Holder
®
NOTE: Use low temperature cycles in
To remove from the brewer, lift the
Pack Holder from
®
Pack
®
Pack
®
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the K40 Elite and is the answer not in the manual?
Questions and answers
I have just descaled my K-40. While running the cycles the large blue lite functioned properly, but the other two smaller blue lite would not lite up. When the lid is lifted to recycle the large lite comes on but not the others. Only the large lite will activate the water, the other two are not responsive. Any idea what is the matter?
If the smaller blue lights on a Keurig K40 Elite do not light up after descaling, possible issues include:
1. Incomplete Descaling – If the red Descale Light was illuminated, ensure the descaling process was completed correctly.
2. Repeated Descaling Still Fails – If the brewer only brews a partial cup after descaling twice, contact Customer Service.
3. Water Reservoir Issues – Ensure the Water Reservoir is properly seated and filled to the correct level.
4. Power Button Not On – Make sure the Power Button is turned on and the green Power Light is illuminated.
5. Handle Not Secured – Confirm the K-Cup® Pack Holder is securely closed, which allows the Brew Buttons to activate.
If the issue persists, contacting Keurig Customer Service is recommended.
This answer is automatically generated