Page 1
Mini Plus • ™ Use & Care Guide SINGLE SERVE COFFEE MAKER Get the most from your new Keurig brewer ®...
Page 2
Before You Brew Plug & Power Fill & Place Remove packing tape from brewer. Add 1 cup (8oz) of water into Pull plug and extend cord from cord a mug. Lift the water reservoir storage located at the back of the lid and pour the water into the brewer.
Page 3
Lower the handle completely and run two water-only brew To replace it, orient the snaps to the indent and just snap it back onto the cycles. Do not insert a K-Cup® pod. K-Cup® pod holder. TIP: Refer to support.keurig.com for video instructions on cleaning the entrance/exit needles.
45 minutes for the descaling procedure. NOTE: The cleaning action of Keurig® Descaling Solution may result in a “foam” dispensed from the brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is heavily scaled, the brewer may not STEP 1: Cleansing Rinse fill properly after the descaler is added.
Page 5
God. that you register your brewer on keurig.com/new so that your purchase information will be stored in our system. Keurig will, at its OTHER LIMITATIONS option, repair or replace a defective brewer without charge upon its receipt of proof of the date of purchase.
Page 6
G. Drip Tray Base H. Water Reservoir Lid I. Water Reservoir J. Power Cord K. Cord Storage For replacement parts, please visit www.keurig.com Coffeehouse taste in your own home. FIND YOUR PERFECT POD With over 70 brands and hundreds of varieties, find your match at keurig.com/new...
Need help?
Do you have a question about the K-Mini Plus and is the answer not in the manual?
Questions and answers