Page 1
SHOT Use & Care Guide Get the most from your new Keurig brewer ®...
Page 2
Before You Brew Plug & Place Rinse & Fill Add Water SHOT Add Water LATTE SHOT LATTE Remove packing tape from brewer and frother, Remove the water reservoir lid, then lift the reservoir and plug into a grounded outlet. Lower the straight up to remove it.
Drip Tray Add Water SHOT LATTE Keep your Keurig® brewer looking its best by The drip tray can hold up to 8 ounces of overflow cleaning the exterior from time to time. Just and should be emptied and cleaned occasionally.
Water Filter, remove and set aside. NOTE: The cleaning action of Keurig® Descaling Solution may result in a “foam” dispensed from the brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is heavily scaled, the brewer may not fill properly after the descaler is added.
Do not use We’re here to help. Visit support.keurig.com for distilled water. You can also install a Keurig® Water Filter to step-by-step videos on cleaning, descaling, and more. help remove water impurities and improve beverage taste.
Keurig will, at its Keurig or its authorized service providers, use of parts other than option, repair or replace a defective brewer without charge upon its genuine Keurig®...
Page 7
Coffeehouse taste in your own home. FIND YOUR PERFECT POD With over 70 brands and hundreds of varieties, find your match at keurig.com/new DC0000001487 REV A...
Need help?
Do you have a question about the K-Latte and is the answer not in the manual?
Questions and answers