Table of Contents
Advertisement
Detail Settings
Preset Settings Page
Use this page to specify the settings for preset camera positions provided to users.
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the settings title page.
44
Presets 1-8
"Application"
Use these options to specify whether this
preset can be used only for picture
recording (
P.45) or is also made
available in WebView Livescope. If it is also
provided in WebView Livescope, always
specify the preset name.
"Preset Name"
Enter a name consisting of up to 15
alphanumeric characters.
"Camera"
Selects the camera for which the preset
position is set.
"Camera parameter"
Use this to set the video capture settings
to be provided.
"Pan, Tilt"
Enter an angle between -179.99 and 180.00.
"Zoom"
Enter a horizontal angle for the field of
view of between 0.01 and 300.0.
"Brightness"
Sets the target value for the camera's auto
exposure feature. Select "Standard" (for bright
subjects) or "Brighter " (for dark subjects).
Picture Recording and External Device I/O Settings Page
Use this page to specify the operating condition for the picture recording function. This page can
also be used to control picture recording from an external device (sensor, etc.) and perform still
video capture based on a predetermined schedule (up to 1000 images).
c
Video images are recorded on flash memory card. Even if the settings on this page are specified,
the Picture Recording function does not perform if there is no memory card in the VB101 slot.
Note
The amount of data that can be recorded for a still image is less than 32 KB. If
this amount is exceeded, the image will not be recorded. The number of images
that can be recorded depends on flash memory card (sold separately) capacity,
however the maximum number of images that can be recorded is 1000.
e
The amount of data for a still image varies depending on the settings for picture size and
picture quality (
P.40), and the subject. As a guide, approximately 5-10 KB is the standard
Tip
when the picture size is set to 320x240 and the picture quality is set to 30. (In some cases this
may be exceeded) To check the amount of data for a still image, select "View"-"Video
information" from the menu after you start up the helper viewer, then check the "Size" value.
Detail Settings
Picture Recording Common Settings
"No. of days recorded pictures held"
Specifies how many days the recorded
picture data will be kept in memory card.
The recorded data which exceeded the
keeping days is erased daily at the time
specified in "Recoreded picture delete time".
In this manner, picture recording function
does not keep data on a permanent basis,
so picture data must be saved as required
by replacing the memory card or using FTP
to transfer the data files.
Picture data files are placed in a directory
called "/card/images". (To record pictures, a
flash memory card is required.) Files created
3
in "yyyymmddHHMMSSCC" (year, month,
day, hour, minute, second, and 1/100 second)
format will be listed as "HHMMSSCC.jpg" in
the yyyymmdd sub-directory.
"Recoreded picture delete time"
Sets the time at which picture data is deleted.
"Recording Priority"
When there is a conflict between the timing
of recording specified in a schedule and
"ON event to OFF event" recordings
controlled from an external device, this
setting specifies which recording takes
priority. Tick "Recording triggered by
external device" or "Recording triggered by
schedule". The factory default setting gives
priority to external device origin recording.
45
Advertisement
Table of Contents
Troubleshooting
