Checking Operation - Canon VB101 User Manual

Initial Setup
Remove the RS-232C path cable connected to the PC used
5
for initial setup and connect the LAN cable.
When you connect cable, turns off the VB101 power.
LAN
cable
Hub
Follow steps
6
your user name and password.
1 Launch the browser and enter the
following URL:
http://192.168.100.1/admin/
2 Enter the user name and password.
User name: root
Password: VB101
c
For the example, the IP address is given as "192.168.100.1". However, the actual
IP address must be changed to match your system settings.
Note
Check the operation (
7
( P.34).
c
When you change the settings, always you should click the "Send Config.
to VB101", or the "Send Config. and Reboot VB101" button.
Note
Before check the operation, install the Web browser on your PC.
To restore the factory initial settings, refer to P.106 in the appendix.
32
- below to launch the browser and enter
3 The title page for specify is displayed.
A sample page is shown at:
http://192.168.100.1/sample/
Settings page
P.33) and specify detailed settings

Checking Operation

When you have completed the initial setup, check that the VB101 works normally. Use the
sample page to simplify checking.
c
Install the Web browser on your PC beforehand.
Note
When you have completed initial setup, launch the Web
1
browser and enter the following URL:
(Example) http://192.168.100.1/sample/
Enter the value specified in the initial settings (
(192.168.100.1).
c
For the example, the IP address is given as "192.168.100.1". However, the actual
IP address must be changed to match your system settings.
Note
Sample page
Click on the sample page.
2
If the sample page appears and the video image is displayed, the VB101 is operating
normally.
P.31) as the IP address
3
33