Toshiba e-STUDIO5540C Manual page 70

5 MANAGING DOCUMENTS
5
Select the following print options as required and click [Print].
Duplex — Select whether you want the document printed on both sides of the paper. When you want to print the
document on both sides, select the Book option to print vertically in the same direction to be bound along the
vertical side of the paper so that the pages can be turned over right and left, or the Tablet option to print with a
vertical reversal to be bound along the horizontal side of the paper so that the pages can be turned over up and
down.
Number of Copies — Enter the number of copies to be printed.
The selectable range of the number of copies differs depending on the model.
- For the e-STUDIO6550C Series and e-STUDIO856 Series
1 copy to 9,999 copies
- Other models
1 copy to 999 copies
Sort Copies — Select this option to output the document separately for each copy.
Group Copies — Select this option to output the document separately for each page.
Rotate Sort Copies — Select this option to output the document by changing the output orientation of each
copy. This option is enabled only when you enter more than one copy in the [Number of Copies] box. When this
option is selected, the Destination option is automatically set to the inner tray. To perform the Rotate Sort
Copies, the portrait and landscape paper must be set in different drawers.
Paper Type — Select the type of paper desired.
Department Code — Enter the 1 to 63-digit department code, if required. You must enter the department code to
print a document if the department code is enabled on the equipment.
Paper Source — Select the paper feed source. Select a paper source that correlates with the printing size.
Destination — Select the tray to which the document will be output.
Staple — Select whether the document is to be stapled or not. When you want to staple the document, select how
it will be done.
"Staple" is enabled only when the Staple Unit is installed.
If you enable the Staple option after enabling the Interleave Pages option, the latter will be automatically
disabled.
Binding — Select this option to output the document folded or stapled at the center. You can set how the
document is output.
Center Fold — The document is folded at the center.
68 How To Manage Documents