Sharp SD-SH111 Operation Manual page 63

Digitally connecting MD recorder or sur-
round processor, etc.
By connecting this unit to processors or amplifiers that support Dolby Digital/DTS
surround, you can enjoy the sound via external equipment. An MD recorder can also
be connected to this unit. (Refer to the operation manual of the equipment to be con-
nected.)
MD recorder
To optical digital
audio input jack
Dolby Digital/DTS
processor or amplifier
To optical digital audio
Optical digital jack cap
When using the optical digital jack, remove the cap
first. After using the jack, replace the cap.
Caution:
To optical digital audio
Turn off the other equipment before making this connection.
output jack
Notes:
Optical digital cable
(option: AD-M1DC)
input jack
Optical digital cable
(option: AD-M3DC)
Do not change the sound mode while recording. The sound may skip.
Do not plug in or unplug the headphones while recording. The sound may skip.
To record the Dolby Digital of a DVD, set the audio output to "D-PCM" (see page
22).
If the PCM sound is recorded on the DVD, set the audio output to PCM (see page
40).
DTS sound on a DVD cannot be recorded.
02/11/20 SD-SH111(U)E6.fm
SD-SH111
ENGLISH
7
E-58