Sharp SD-SH111 Operation Manual page 59

To check the timer setting:
1 While in the timer playback stand-by mode,
press the TIMER button.
2 Within 10 seconds, press the or button to select "TIMER CALL", and press
the ENT button.
The unit returns to the timer playback stand-by mode after the setting contents
are displayed in order.
When the start time is reached:
Playback starts automatically and the volume increases gradually.
The timer playback indicator flashes.
Timer playback indicator
When the finish time is reached:
The unit is set to the power stand-by mode automatically.
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the same setting,
perform the following operations.
1 Turn the power on and press the TIMER button.
2 Within 10 seconds, press the ENT button.
After the setting contents are displayed in order, the unit is set to the timer play-
back stand-by mode.
Changing the timer setting:
Turn the power on, and repeat the operation from step 1 in "Setting the timer" (page
53).
Canceling the timer playback:
Timer playback is canceled by turning the power on while in the timer playback stand-
by mode. The same operation can be performed in the following procedure without
turning the power on.
1 Press the TIMER button.
"TIMER CANCEL" will appear.
Timer setting indicator
2 Within 10 seconds, press the ENT button.
Timer playback will be canceled (the contents of the setting will not be canceled).
Caution:
The contents of the setting will be erased if the unit is unplugged or a power failure
occurs. In such cases, set the timer again.
This unit cannot set the timer of other equipment.
When setting the timer playback using the digital tuner, TV, VCR, or the connected
equipment should be set to timer playback at the same time.
Note:
The timer operation is disabled with discs containing menus.
02/11/20 SD-SH111(U)E6.fm
SD-SH111
ENGLISH
7
E-54