Table of Contents
Advertisement
REMOTE CONTROL
This section describes how to operate the DMP using the buttons on the remote control.
Some of the functions can also be carried out using the buttons on the front panel.
To switch the DMP in and out of standby mode.
TV
To switch between TV or Radio (in viewing mode).
To turn the sound off/on (mute).
- +
To adjust the volume of digital programmes.
The DMP's maximum level is controlled by the TV's present
volume setting.
0 - 9
To change channel and to select individual menu options.
Note: If 0 is entered as the first digit, the Freeze (on/off) func-
tionality is activated .
Info. To display short and extended information (if transmit-
ted) about current and next programmes.
BACK
To go back one level in the menus normally without storing
settings.
EXIT
To return to viewing mode from a menu without storing
settings (in menu mode).
MENU
To display or exit from the "Main Menu" screen.
GUIDE
To obtain a list of present and following programmes for the
available channels. This information is only shown if your
Service Provider transmits programme information (EPG
information).
P+ P-
To change channels up and down by one unit.
To change page in a menu/list/text if more than one page is
available. To browse through teletext history.
To move up/down in the menus and to change channels.
To change settings in menus.
OK
To confirm choices and selection of a highlighted item.
To display the TV/Radio channel list.
(Red) At the moment, no function.
OPTION (Green) To select service options in viewing mode e.g. Al-
ternative Audio DVB Subtitling etc. At the moment, no func-
tion.
(Blue) To toggle between present and previous TV/Radio
channels.
TEXT
To enter and exit the application Teletext. At the moment,
no function.
GB 5
Advertisement
Table of Contents
