Program End Search - Panasonic AG-513E Operating Instructions Manual

Program End Search

Locates end point of recording for continuity.
1
Press SEARCH twice in Playback or
Stop mode to display PROGRAM END
SEARCH screen .
2
Press FF
PROGRAM END SEARCH
to start search.
To cancel,
SEARCH START : FF
press PLAY or STOP.
EX I T : SEARCH
Example of Program End Search operation.
Fig.1
PLAYBACK DIRECTION
Program 1
Press SEARCH button
End Point
FF
Fig.2
Program 1 BLANK Program 2
Press SEARCH button
FF
Fig.3
If search exceeds a few seconds in BLANK area.
Press SEARCH button
Program 1 BLANK
FF
End Point
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
Press SEARCH button
Note
• If Program End Search is started very close to an
index mark, that mark may be skipped over.
Program 2 or BLANK
BLANK
End Point
Program 2
25