Auto Clock Set - Panasonic AG-513E Operating Instructions Manual

Initial Setup (continued)
Setup Channel and Auto Clock Set (TUNER:ON only)
1
Press CH or CH
• If you use a cable box, turn it on and select PBS channel in your time zone.
2
Press CH
CHANNEL / CLOCK AUTO SET
CONNECT ANTENNA CABLE
These on-screen displays will appear in sequence.
AND I F YOU USE A CABLE
BOX, TUNE I T TO YOUR
• CH AUTO SET PROCEEDING
LOCAL PBS CH THEN. . .
• CH AUTO SET COMPLETED
PLE ASE PRESS CH UP KEY

Auto Clock Set

Auto Clock Set is performed only when Channel Auto Set is completed in above steps.
1
Press ACTION to display MAIN MENU.
2
1) Press
M A I N MENU
2) Press ACTION to display SET CLOCK screen.
VCR LANGUAGE
T V
C H C H CLOCK EX I T
SELECT :
SET : ACT I ON
3
1) Press
SET CLOCK
AUTO CLOCK K SET
MANUAL
2) Press CH
T I ME ZONE ADJUST : 0
SELECT : • If Channel Auto Set is not performed, "CH AUTO SET
SET :
PROCEEDING" appears.
END : ACT I ON
• "AUTO CLOCK SET PROCEEDING" appears.
Setup completed
Setup completed
Press CH
3 / 6 / 2002 WED 12 : 00PM
• If your area observes
DST : ON
daylight saving time, but
SETT I NG : CH 1 0
you would like to turn the
AUTO CLOCK SET
DST feature off, set
COMPLETED
DST : OFF (see "Clock"
on pages 12 and 13).
END : PRESS CH UP KEY
If time is not correct...
•
even though your area observes daylight
saving time and DST is set to ON, do
"Time Zone Adjust" steps on page 13.
IMPORTANT NOTE FOR AUTO CLOCK SET
• Auto clock set is performed the first time the unit is turned off each day. If used, a cable box must be left on
and tuned to the PBS channel at the time the unit power is turned off if you want auto clock set to be done.
• If using a DSS receiver, it must be turned off for auto clock set.
• If a Cable Box or DSS receiver is connected to the unit via Audio/Video Jacks, an RF coaxial cable must
also be connected for auto clock set and channel auto set features.
• If for any reason the time is changed manually, automatic time correction will not occur.
10
to display CHANNEL/CLOCK AUTO SET screen .
to start Channel Auto Set.
to select "CLOCK."
to select "AUTO CLOCK SET," then
press .
to start.
to exit.
Setup incomplete
Setup incomplete
AUTO CLOCK SET
I S I NCOMPLETE
PLEASE SET CLOCK BY
PRESS I NG ACT I ON KEY
See next page.