Tape Operation
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information is also included.
These index marks can be used to access or scan recordings.
Index Search
Go directly to the desired recording.
1
Press SEARCH in Playback or Stop
mode to display INDEX SEARCH
screen.
2
1) Press number
I NDEX SEARCH
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
FORWARD SEARCH
:
FF
REVERSE SEARCH
:
REW
NEXT
:
SEARCH
EX I T
:
STOP
2) Press FF or REW
I NDEX SEARCH 3
I NDEX SEARCH
• Play begins at search
I NDEX SEARCH
end. To search forward or
back 1 index, press FF or
REW while screen left is
displayed (10 seconds).
FORWARD SEARCH
:
FF
REVERSE SEARCH
:
REW
To cancel, press PLAY or STOP.
I To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1
2
3
4
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1
2
3
4
NOTE: indicates start points of each recording.
24
keys to select
the recording
number.
• To calculate
number, see below.
to start search.
5
6
7
Notes
• Make each entry within 5 minutes, or the
Index Search mode will be canceled.
5
6
7
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.