Panasonic AG-513E Operating Instructions Manual page 23

Cancel a Timer Recording:
(Recording is in progress)
Hold down STOP for a few
seconds to cancel the Timer
Recording.
• Any future daily or weekly recordings
will be performed as programmed.
Notes
• 2 minutes before Timer recording is performed, "PLEASE PREPARE FOR TIMER REC" appears
and/or the PROG TIMER Indicator flashes. Be sure a cassette with record tab is loaded and the
unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered program will have priority.
• If the start time for a Timer Recording comes up during a normal recording or One Touch
Recording (page 14), the Timer Recording will not be performed.
• If there is a power interruption of more than one minute, the recording may not be performed or
continued.
• If "INCOMPLETE" appears after all items have been set, check all entries and make necessary
corrections.
Review, Replace or Clear Program
Contents : ( Recording is not in progress )
1
Repeat steps 1 and 2 on page 22.
2
Press
P DT START STOP CH SPD
1 day 9 : 00p 12 : 00a 08 SP
the desired program.
2 8 10 : 00a 12 : 00p 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
CANCEL : ADD / DLT
SELECT 1 - 8 :
ENTER :
END : PROG / ACT I ON
3
To Replace program...
DATE START STOP CH
8 SAT SAT 9:00P 12: 00A 08
TODAY ABC
CATEGORY : MOV I E SP
----------------------------------------------
SELE CT START DATE
SELECT :
SET :
END : PROG / ACT I ON
To Clear program...
Press ADD/DLT.
P DT START STOP CH SPD
1 -- -- : -- -- : -- -- --
2 8 10 : 00p 12 : 00a 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
SELECT 1 - 8 :
ENTER :
END : PROG / ACT I ON
4
Press PROG twice (or ACTION)
to exit this mode.
to select
1) Press to display.
2) Press to select
and press or
to set new program
contents.
3) Press PROG
(or ACTION).
23