Setup Flow For Lpr Printing - Toshiba ESTUDIO355 Quick Start Manual

Setup Flow for LPR Printing

This equipment can be used with LPR printer connection using the LaserWriter 8 printer driver.
Setup Flow
Connect this equip-
ment
Set up the TCP/IP
(IPv4)
Set up the IPv6
Set up the Printing
Service
Connecting over TCP/IP Network
Setting up the LPR
printer connection
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
• Chapter 4 "CONNECTING TO THE DEVICE"
"2. CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv4)"
Reference: TopAccess Guide
• Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the IPv6 Protocol"
Reference: TopAccess Guide
• Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the IPv6"
Enable the LPD Printing Service using TopAccess.
Reference: TopAccess Guide
• Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Print Service Settings"
"Setting up the LPD Print"
Description/Reference
Mac OS 8.6
Mac OS 9.x
Mac OS X
5
53