Mitsubishi Electric DX-TL4509E Quick Start Manual page 38

Press 2 Configuration Check List
PTZ Rear Connectors
Test (Front Panel Buttons) – Press the PTZ button and press pan and tilt
buttons to move the camera.
See Page 50 of the DX-TL5000E installation manual.
If it does not respond confirm the settings of both DVR and camera
Note: Pelco protocol is normally numbered 0 offset, camera numbering starts
from "0". Camera 2 would have an address of 1.
PTZ Configuration Overview
(322 000 000) Check the settings
Press E Exit twice
37
Press E Return
to exit the SET UP menu.
.