Hitachi SelecSet 900 Series User Manual page 98

Example
Procedure
Group hold
(GH 1-8)
HCXTD850, Rev. A02, September 2001
To activate BLF and PCK for key group member 1154
(assume that the station speed dial access code is #7):
1
Press the <PROG> soft key or dial #7.
2
Press the autodial key you want to program for the
key group member.
3
Dial 1-1-5-4—1-0-0-1 where...
1-1-5-4 = the key group member's station number
1 = activation of the busy lamp field
0 = deactivation of ring monitor
0 = deactivation of bridge
1 = activation of PCK
4
Wait for confirmation tone (three short beeps).
Now the LED associated with the key programmed
for station number 1154 indicates its call status, and
you can pick up a call while it is ringing at station
1154.
If you are assigned to a key group, you have access to the
group hold feature. Group hold enables any member of
your key group to put a call on group hold, and allows any
member to retrieve the call using the lit group hold key at
his or her phone.
A maximum of eight group hold keys can be programmed
for each key group. (Group hold must be assigned for you
by your system administrator.)
B K G
ASIC EY ROUP
F
EATURES
3-11