Hitachi SelecSet 900 Series User Manual page 25

F K
IXED EYS
Displaying the
active CAP
Using CAP
keys
1-14
The active CAP number is displayed on the top line of
your display along with other displayed information.
Additional ringing calls and CAPs on hold do not display
on the second line.
Use the following guidelines when using your CAPs:
CAP
1 If you make or receive only one call, use CAP 1.
2 If a second call rings at your station, or you want
to make a second call, press <HOLD>, then
press CAP2 to answer or dial the next call.
3 Repeat the procedure for CAP 2 to answer or
dial the next call.
4 Use this CAP for outgoing calls when CAPs 1,
2, and 3 are busy and for priority calls. Incoming
calls do not terminate to this CAP.
S
ELEC
Description
HCXTD850, Rev. A02, September 2001
S 900 U G
ET SER UIDE