To Set Cruise Control Speed; To Increase Cruise Control Set Speed - Hyundai ix35 Owner's Manual
Installation maintenance specifications
Hide thumbs
Also See for ix35:
- Owner's manual (419 pages) ,
- Installation manual (3 pages) ,
- Owner's manual (30 pages)
Table of Contents
Advertisement
To set cruise control speed:
1. Push the Cruise ON-OFF symbol but-
ton on the steering wheel to turn the
system on. The Cruise indicator light
in the instrument cluster will illuminate.
2. Accelerate to the desired speed, which
must be more than 25 mph (40 km/h).
OEL059031
3. Move the lever (1) down (to SET-), and
release it at the desired speed. The
SET indicator light in the instrument
cluster will illuminate. Release the
accelerator pedal. The desired speed
will automatically be maintained.
On a steep grade, the vehicle may slow
down or speed up slightly whilst going
downhill.
Driving your vehicle
OEL059033
To increase cruise control set
speed:
Follow either of these procedures:
• Move the lever (1) up (to RES+) and
hold it. Your vehicle will accelerate.
Release the lever at the speed you
want.
• Move the lever (1) up (to RES+) and
release it immediately. The cruising
speed will increase by 1.2 mph (2.0
km/h) or 1.0 mph (1.6 km/h) each time
you move the lever up (to RES+) in this
manner.
OEL059032
5 49
- Quick Links:
- Indicator Symbols on Instrument Cluster
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ix35 and is the answer not in the manual?
Questions and answers
Front passenger seat belt senors keeps going off even when nothing is on the seat. How can I get this fixed?
A large number of Hyundai ix35 vehicles made between November 2011 and June 2012 were affected by a seatbelt pre-tensioner fault, leading to a recall. You can replace the pre-tensioner yourself, but it is difficult due to its placement. A Hyundai dealer can check and repair this issue for you.
This answer is automatically generated