Features of your vehicle
■ ■ Information Display
<Active Call>
<Voice Recognition>
The Bluetooth
®
icon appears on the
upper side of audio display when a
phone is connected.
4
142
■ ■ Phone Setup
All Bluetooth
®
-related operations can be
performed by voice command or by man-
ual operation.
- By Voice Command:
Press
button on the steering wheel
to activate voice recognition.
- By Manual Operation:
1) Push the TUNE knob to enter SETUP
mode
2) Select "PHONE" item by rotating the
TUNE knob, then push the knob.
3) Select desired item by rotating the
TUNE knob, then push the knob.
• Pairing phone
Before using Bluetooth
®
features, the
phone must be paired (registered) to the
audio system. Up to 5 phones can be
paired in the system.
✽ ✽ NOTICE
• The pairing procedure of the phone
varies according to each phone model.
Before attempting to pair phone,
please see your phone's User's Guide
for instructions.
• Once pairing with the phone is com-
pleted, there is no need to pair with
that phone again unless the phone is
deleted manually from the audio sys-
tem (refer "Deleting Phone" section)
or the vehicle's information is
removed from the phone.
Need help?
Do you have a question about the ix35 and is the answer not in the manual?
Questions and answers
Front passenger seat belt senors keeps going off even when nothing is on the seat. How can I get this fixed?
A large number of Hyundai ix35 vehicles made between November 2011 and June 2012 were affected by a seatbelt pre-tensioner fault, leading to a recall. You can replace the pre-tensioner yourself, but it is difficult due to its placement. A Hyundai dealer can check and repair this issue for you.
This answer is automatically generated