GE -DS-242-POE User Manual page 99

IGMP Configuration
The Switch support IP multicast, you can enable IGMP protocol on web
management's switch setting advanced page, then the IGMP snooping information
displays. IP multicast addresses range are from 224.0.0.0 through 239.255.255.255.
Figure 4-55: IGMP Configuration interface
This page includes the following fields:
OBJECT
IGMP Protocol
IGMP Fastleave
IGMP Querier
NOTE: Fast Leave:
The Managed Switch can be configured to immediately delete a member port of a
multicast service if a leave packet is received at that port and the fastleave function
is enabled for the parent VLAN. This allows the Managed witch to remove a port from
the multicast forwarding table without first having to send an IGMP group-specific
query to that interface.
GE-DS-242-PoE Managed Ethernet Switch User Manual
DESCRIPTION
Enable or disable the IGMP protocol.
Enable or disable Fast Leave on the port.
Enable or disable the IGMP query function. The IGMP query information
will be displayed in IGMP status section.
Chapter 4: Web-Based Management
95