Table of Contents
Advertisement
Chapter 4: Web-Based Management
NOTE:
Enable 802.1Q VLAN, the all ports on the switch belong to default VLAN, VID is
1. The default VLAN can't be deleted.
VLAN Filter
• 802.1Q VLAN Port Configuration
This page is used for configuring the Switch port VLAN. The VLAN per Port
Configuration page contains fields for managing ports that are part of a VLAN. The
port default VLAN ID (PVID) is configured on the VLAN Port Configuration page. All
untagged packets arriving to the device are tagged by the ports PVID.
This section provides 802.1Q Ingress Filter of each port from the Switch, the screen in
Figure 4-30 appears.
Figure 4-30: 802.1Q Ingress filter interface
64
GE-DS-242-PoE Managed Ethernet Switch User Manual
Advertisement
Table of Contents
