Mac Filtering - GE -DS-242-POE User Manual

Static MAC Table
You can add a static MAC address that remains in the switch's address table
regardless of whether the device is physically connected to the switch. This saves the
switch from having to re-learn a device's MAC address when the disconnected or
powered-off device is active on the network again. Via this interface, you can add /
modify / delete a static MAC address.
Add the Static MAC Address
You can add a static MAC address in the switch MAC table here.
Figure 4-49: Static MAC Addresses interface
This page includes the following fields:
OBJECT
MAC Address
Port Num
VLAN ID

MAC Filtering

By filtering MAC address, the switch can easily filter the pre-configured MAC address
and increase the security. You can add and delete filtering MAC address.
GE-DS-242-PoE Managed Ethernet Switch User Manual
DESCRIPTION
Enter the MAC address of the port that should permanently forward
traffic, regardless of the device network activity.
Pull down the selection menu to select the port number.
The VLAN ID for the entry.
Chapter 4: Web-Based Management
89