Replacing The Robot - Quantum Scalar i40 User Manual

Chapter 8: Installing, Removing, and Replacing Components

Replacing the Robot

Replacing the Robot
242
Caution: When unpacking the library in its new location, lift it out of
the packaging and immediately place it on its side to
remove the four thumbscrews securing the robot to the
floor of the library. Do not place it upright until you have
removed the four thumbscrews, or you could damage the
chassis or the robot. When placing the library on its side,
do not set it on the "rack ear" or the magazine handle, or
you could damage them.
Robot replacement is a service-only procedure. If the robot fails, you will
need to call Quantum Support for a replacement.
Quantum Scalar i40 and Scalar i80 User's Guide