Display Attaching; Display Mounting - Mitsubishi Electric BR-LM1KK Quick Start Manual

3 D i s p l a y a t
3 D i s p l a y a t

3.1 Display mounting

Starting from the panel at the center of the middle row in
the display wall, spread to its both sides and top / bottom.
Lastly fill the rest of areas.
（8） （5）
（1）
（2）
（
（6） （4）
1 Press the release lever on right side of the base bracket.
 Be careful not to bump into the front bar, since it opens
ahead.
Opening
direction
Front bar
2 Draw the front bar to the front. Then lift and draw the lock
bar at the right lower side of the front bar to lock the front
bar.
Front
Front bar
Lock bar
Lift and draw the Lock bar
EN-8
t a c h i n g
t a c h i n g
（9）
（3）
（7）
Base
bracket
Release lever
Rear
Base bracket
3 Hang the display brackets in the back of the panel on the
front bar so as to fit the hole and the protrusion toghether.
 Carefully treat the panel not to touch with adjacent panels.
Protrusion
4 Temporarily fix the panel with the bolts and washers
which were on the display brackets.
 Screen gaps could not be adjusted if you fix the bolts
firmly
5 Attach the handle(R) on the right upper side of the display
with 2 bolts that fixed it.
 When attaching, contact inside the handle with the bezel
side surface closely.
Handle (R)
Bezel side
surface
Washers
Bolts
2 bolts