Mitsubishi Electric BR-LM1KK Quick Start Manual page 6

Portrait
 In portrait orientation, always rotate top side right in
consideration of the panel holding structure.
Top
面
Front
[LM55S1/P1]
R
{LM46P1}
Need the metal fitting specialy. Contact your MITSUBISHI
dealer.
5 Attach the removed handle (L) (without wire) on the right
lower corner of the panel seeing back side with the screws
that fixed it on the wall mount bracket.
 When attaching, contact inside the handle with the panel
side surface closely.
Landscape
Portrait
EN-6
L
6 Attach the hook on the wall with suppied 2 Bolts.
Hook
Bolt (2 pcs)
7 Starting from the panel at the center of the bottom row in
the display wall, spread to its both sides and go to upper
rows.
（8） （7）
（5） （4）
（1）
（2）
8 Hang the base bracket at the center of bottom row (1) on
the hook.
9 Shift the position of the base bracket in about 6 mm. Take
a level of the bracket. If bolt (M6 length over 50) is inserted
into two holes at the top of the bracket, it can lift the
bracket to tweak the vertical position.
 Remove the bolts after adjustment
（9）
（6）
（3）
Hook
M6 Bolt
Screw
hole
6mm
Hook