Table of Contents
Advertisement
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL
Before folding the treadmill, remove the key and
unplug the power cord. CAUTION: You must be
able to safely lift 45 lbs. (20 kg) to raise, lower, or
move the treadmill.
1. Hold the metal frame firmly in the location shown
by the arrow below. CAUTION: Do not hold the
frame by the plastic foot rails. Bend your legs
and keep your back straight. Raise the frame
about halfway to the vertical position.
1
Frame
2. Hold the treadmill firmly with your right hand as
shown. Pull the latch knob to the left and hold it.
Raise the frame until the catch is past the latch pin.
Then, slowly release the latch knob; make sure
that the catch is resting against the latch pin.
2
To protect the floor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight.
Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
Latch
Pin
Latch
Knob
Catch
HOW TO MOVE THE TREADMILL
Before moving the treadmill, fold it as described at the
left. CAUTION: Make sure that the catch is resting
against the latch pin. Moving the treadmill may
require two people.
1. Hold the frame and one of the handrails, and place
one foot against a wheel.
1
Frame
Handrail
Wheel
2. Pull back on the handrail until the treadmill will roll
on the wheels, and carefully move it to the desired
location. CAUTION: Do not move the treadmill
without tipping it back, do not pull on the frame,
and do not move the treadmill over an uneven
surface.
3. Place one foot against a wheel, and carefully lower
the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
1. See drawing 2. Hold the upper end of the treadmill
with your right hand as shown. Pull the latch knob
to the left and hold it. Next, lower the frame until it
is past the latch pin. Then, release the latch knob.
2. See drawing 1 at the left. Hold the metal frame
firmly with both hands, and lower it to the floor.
CAUTION: Do not hold the frame by the plastic
foot rails, and do not drop the frame. Bend your
legs and keep your back straight.
15
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Cadence G 5.9 Treadmill and is the answer not in the manual?
Questions and answers
How and where do I lubricate the power.
How do I lubricate the motor?
My Weslo Cadence 5.9I squeaks for about a minute after starting. I don't see any instructions on lubrication in the manual other than the belt.
Your Weslo Cadence G 5.9 treadmill features a walking belt that is pre-coated with high-performance lubricant. Do not apply silicone spray or other substances to the walking belt or walking platform unless instructed by an authorized service representative. If the treadmill is squeaking, check for proper belt alignment and tension. If necessary, adjust the walking belt or inspect other components for wear.
This answer is automatically generated
How do I lubricate the belt, I **** very handy.
To lubricate the belt on a Weslo Cadence G 5.9 Treadmill, apply the recommended World Famous Treadmill Lube to the underside of the walking belt once per year. Do not use silicone spray or other substances unless instructed by an authorized service representative.
This answer is automatically generated
The display on the console is very light and almost impossible to read. Is there some sort of backlight switch that I can turn on to better illuminate the info on the display (distance walked etc.)? Thanks
Lubrication required?
Yes, the Weslo Cadence G 5.9 Treadmill requires lubrication. A product listing mentions a "Weslo Cadence G 5.9 Treadmill Walking Belt + Free 1oz Lube," indicating that lubrication is needed for maintenance.
This answer is automatically generated
When the treadmill is plugged in and turned on the display shows "FF". No other controls work. Do you know how to fix this?