Weslo Cadence G-40 Treadmill Manual
English manual
Hide thumbs
Also See for Cadence G-40 Treadmill:
- User manual (28 pages) ,
- User manual (28 pages) ,
- User manual (28 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Weslo Cadence G-40 Treadmill
Summary of Contents for Weslo Cadence G-40 Treadmill
- Page 3 Always wear athletic shoes; never use the treadmill with bare feet, wearing only stockings, or in sandals.
- Page 6 16mm Screw 19mm Screw (10)–4 19mm Tek #10 x 1" Screw M8 x 15mm Screw (26)–6 (85)–2 (58)–2 Bolt (8)–6 M6 Flat M5 Star M8 x 52mm Bolt (82)–2 Washer (32)–4 Washer (7)–2 M10 Flat Washer (14)–2 M6 x 58mm Bolt (13)–4 M8 Nut (46)–2 M8 Star Washer (5)–6...
- Page 21 carbohydrate calories fat calories...
- Page 25 42 21...
Need help?
Do you have a question about the Cadence G-40 Treadmill and is the answer not in the manual?
Questions and answers
Is it in miles or kilometers
The Weslo Cadence G-40 Treadmill display can show distance in either miles or kilometers. To check the selected unit, remove the key from the console, hold down the Stop button, reinsert the key, wait for a tone, and then release the Stop button. An "E" indicates English miles, and an "M" indicates metric kilometers. The unit can be changed using the speed increase button.
This answer is automatically generated
Why will my Wesco G-40 treadmill stop running after about 3 turns?
Your Weslo Cadence G-40 treadmill may stop running after about 3 turns due to a tripped reset/off circuit breaker. Check the circuit breaker located on the treadmill frame near the power cord. If it has tripped, wait for five minutes, then press the switch back in to reset it. Also, ensure the treadmill is plugged into a properly grounded outlet using a surge suppressor that meets the specified requirements. If the issue persists, further troubleshooting may be needed.
This answer is automatically generated
What kind of lube do you use on a G 40 treadmill? How do you lube it? Do you have to Loosen the belt?
The Weslo Cadence G-40 treadmill features a walking belt pre-coated with high-performance lubricant. It is important not to apply silicone spray or other substances, as they can damage the belt. The manual does not mention the need to loosen the belt for lubrication, and additional lubrication is not required due to the pre-lubrication.
This answer is automatically generated