Page 1
USER’S MANUAL Model No. WLTL19616C.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to iconservice.ca. CUSTOMER CARE Call toll-free 1-888-936-4266 Mon.–Fri.
Page 2
305284 WESLO is a registered trademarks of ICON Health & Fitness, Inc. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google Inc.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4
19. Always stand on the foot rails when starting 26. Do not change the incline of the treadmill by or stopping the walking belt. Always hold the placing objects under the treadmill. handrails while using the treadmill. 27. Never insert any object into any opening on 20.
CADENCE reading this manual, please see the front cover of this ® G 3.9 treadmill. The CADENCE G 3.9 treadmill offers a manual. To help us assist you, note the product model selection of features designed to make your workouts number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
ASSEMBLY • Assembly requires two persons. • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing •...
Page 9
3. Tighten two M8 x 20mm Screws (2) with two M8 Washers (5) and a M10 x 42mm Screw (1) into the Base (35) and into the Right Upright (56) as shown; do not fully tighten the Screws yet. Repeat this step on the left side of the tread- mill.
Page 10
6. Attach the Storage Latch (58) to the Left Upright (57) with two #10 x 1" Tek Screws (4); start both Tek Screws, and then tighten them. 7. The incline of the treadmill can adjusted to two different levels. Rotating the Right and Left Incline Feet (41, 42) to the position shown will position the Frame (40) at the lower incline level.
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD more amps. To avoid overloading the circuit, do not plug other electrical devices, except for low- Use a Surge Suppressor power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same Your treadmill, like other electronic equipment, can be circuit.
Page 12
CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE To turn on the power, see page 13. To use the man- ual mode, see page 13. To use a goal workout, see The treadmill console offers a selection of features page 14. To use a preset workout, see page 14. To change the incline of the treadmill, see page 15.
Page 13
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE Reset IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
Page 14
HOW TO USE A GOAL WORKOUT HOW TO USE A PRESET WORKOUT 1. Insert the key into the console. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page See HOW TO TURN ON THE POWER on page 13. 2.
Page 15
HOW TO CHANGE THE INCLINE OF THE TREADMILL To vary the intensity of your exercise, you can change the incline of the treadmill. There are two incline levels. Before changing the incline, remove the key and unplug the power cord. Next, fold the treadmill to the storage position (see page 16).
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before folding the treadmill, remove the key and Before moving the treadmill, fold it as described at the unplug the power cord. CAUTION: You must be left.
Reset MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. Make sure that the Regular maintenance is important for optimal per- power switch is in the on position. formance and to reduce wear. Inspect and properly tighten all parts each time the treadmill is used.
SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the a. If the walking belt is off-center, first remove the specifications described on page 11.
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
PART LIST Model No. WLTL19616C.0 R0917A Key No. Qty. Description Key No. Qty. Description M10 x 42mm Screw Wheel M8 x 20mm Screw Base M8 x 15mm Screw Drive Motor #10 x 1" Tek Screw Motor Bracket M8 Washer 1/4" Motor Screw M10 x 75mm Screw Controller M8 x 80mm Screw...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the CADENCE G 3.9 and is the answer not in the manual?
Questions and answers