Resolving The Flipper Jam Error - Fargo DTC400e User Manual

RESTRICTED USE ONLY

Resolving the Flipper Jam Error

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
•
Symptom: The Flipper Table Module is jamming.
•
Printer Error State: The Flipper Table has jammed while either aligning
itself or flipping a card.
•
Driver Monitor Error Display: Flipper Jam
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
Fargo Electronics, Inc.
4-38