Pad Edit Page; Editing A Sample Pad - Yamaha AW4416 Operation Manual

SAMP. PAD screen

Editing a sample pad

[Function]
Assign a name to a sampling pad, erase a
pad, or trim a sample.
[Key operation]
• Sampling pad section [EDIT] pad
(PAD Edit) key
• Repeatedly press the [EDIT] pad until the
screen shown at the right appears.
[Mouse operation]
M button SAMP. PAD EDIT button
PAD Edit tab
[Screen functions]
A
NAME
This menu allows you to assign the desired
name to a pad. When you move the cursor to
this menu and press the [ENTER] key, the fol-
lowing buttons will appear.
These buttons have the following functions.
PAD
Select the bank/pad number of the pad that you
wish to name.
NAME
Access the NAME EDIT screen where you can
input a name. You can input a maximum of 8
characters.
Tip!
Immediately after a sample has been
assigned to a pad, a default name of "Smpltr"
will be assigned automatically.
Undo is not possible after the pad name has
been edited.
86
— Reference Guide

PAD Edit page

[F4]
1
2
3
4
9
B
5 6 7
ERASE
This menu allows you to erase the sample and
name assigned to a pad, and return the pad to
its initial state. When you move the cursor to
this menu and press the [ENTER] key, the fol-
lowing buttons will appear.
These buttons have the following functions.
PAD
Select the bank/pad number of the pad that you
wish to erase.
EXECUTE
Execute the pad erase operation.
Undo is not possible after a pad has been
erased.
8